The error of the fuel dispenser exceeds ±0.30 percent , and the reasons for not being able to adjust are as follows:
1. El bloque de conexión del caudalímetro está desgastado. Cuando aumenta el diámetro interior del bloque de conexión, aumenta la carrera del pistón, aumenta el volumen de descarga y también aumentará la cantidad de aceite pagado.
Solution for the fuel dispenser equipment: replace the connecting block or adjust it with the adjusting mechanism. If the hole is not worn much, the original adjustment screw can be lengthened appropriately to increase the adjustment by 0.30 percent .
2. La camisa del cilindro del pistón del equipo dispensador de aceite está desgastada. El espacio entre el manguito de cobre grande y el pistón grande está desgastado, y el aceite en el área de alta-presión no pasa a través del medidor de flujo para medir la descarga de aceite y se filtra por el espacio, lo que genera un error de medición. .
Tanker Equipment Solution: Return to factory for repair or replacement. If the error value exceeds the allowable error of ±0.3 percent , the wearing parts should be replaced.
3. La junta tórica interna-está dañada. Después de trabajar durante mucho tiempo, la junta tórica se desgasta fácilmente y falla, lo que provoca fugas internas y hace que el error de indicación esté fuera de tolerancia.
Solución para equipos de camiones cisterna: reemplazar el O-ring.
4. The adjustment rod of the fuel dispenser equipment is stuck or worn. That is, there is a foreign body that jams the flow sensor or the adjustment rod is seriously worn, which makes the leakage in the flow measurement converter too large, and even the adjustment value and the leakage amount are very different. For example, broken springs, vanes, screws, gaskets, and other foreign objects on the high-pressure spool in the separator. It is squeezed between the piston and the copper sleeve, or on the top of the piston, so that the piston cannot move and the sensor cannot drain oil.
Solución para el equipo de la cisterna: quitar el pistón, sacar el cuerpo extraño y reparar la parte atascada; reemplace la varilla de ajuste muy desgastada.